MITSUBISHI
ME-NET module
A1SJ71ME81

ME-NET interface unit Structured text language is a programming language that describes a program with a structured description of the text. It is a programming language similar to a high level language.

MITSUBISHI
Main communication module
A1SJ51T64

Up to controlled I/O points: 8 point I/O combination module, up to 128 points. Use any I/O module, up to 64 points.

MITSUBISHI
Intelligent communication module
A1SD51S

A1SD51S is an intelligent communication module used in ANS series, Can use the AD51H-BASIC language to make online or offline programming on the universal terminal or computer, Multitasking can also be performed with up to two programs at high speed. PLC is the use of " sequential scanning, and constantly circulating " way to work.

MITSUBISHI
I/O bus monitoring module
A1SS91

A1SS91 is used to insert a fixed control program in front of the user program to monitor the specific Y output. Monitoring is carried out only when the CPU is in a state of running or stopping, and the monitoring failure is monitored in the suspended state.

MITSUBISHI
High speed interrupt module
A1SI61

A1SI61 is designed to control the application of mechanical devices that require high speed response time. A1SI61 temporarily stop running in order to generate an interrupt signal when the program is running, And according to the interrupt vector to execute the corresponding interrupt handler.

MITSUBISHI
CC-Link module
A1SJ61BT11

Three remote components can be connected to the CC-LINK system. Remote I/O: refers to the field components that require only ON/OFF control, Such as digital I/O or pneumatic valve, etc.

MITSUBISHI
CC-Link module
A1SJ61QBT11

CC-Link master / slave station. PLC is the use of " sequential scanning, and constantly circulating " way to work.

MITSUBISHI
Analog timer module
A1ST60

A1ST60 analog timer module has 8 analog timers. Each timer can be set between 0.