LK Automation Limited
Brand:
MITSUBISHI
Grid
List
MITSUBISHI
Reader module
A1SD35ID1
Reader writer 1 channel connection, AnSCPU/QnASCPU. PLC is the use of " sequential scanning, and constantly circulating " way to work.
Reader module
A1SD35ID1
Reader writer 1 channel connection, AnSCPU/QnASCPU. PLC is the use of " sequential scanning, and constantly circulating " way to work.
MITSUBISHI
Reader module
A1SD35ID2
Reader writer 2 channel connection, AnSCPU/QnASCPU. PLC is the use of " sequential scanning, and constantly circulating " way to work.
Reader module
A1SD35ID2
Reader writer 2 channel connection, AnSCPU/QnASCPU. PLC is the use of " sequential scanning, and constantly circulating " way to work.
MITSUBISHI
Reader module
A1SD32ID1
AnS, QnAS bus connection, the reader to write program 1 channel connection. Input status and input information input from the input interface, CPU will be stored in the working data memory or in the input image register.
Reader module
A1SD32ID1
AnS, QnAS bus connection, the reader to write program 1 channel connection. Input status and input information input from the input interface, CPU will be stored in the working data memory or in the input image register.
MITSUBISHI
Reader module
A1SD32ID2
AnS, QnAS bus connection, the reader to write program 2 channel connection. Input status and input information input from the input interface, CPU will be stored in the working data memory or in the input image register.
Reader module
A1SD32ID2
AnS, QnAS bus connection, the reader to write program 2 channel connection. Input status and input information input from the input interface, CPU will be stored in the working data memory or in the input image register.
MITSUBISHI
Reader module
A1SJ71ID1-R4
AnS, QnAS bus connection, the reader to write program 1 channel connection.
Reader module
A1SJ71ID1-R4
AnS, QnAS bus connection, the reader to write program 1 channel connection.
MITSUBISHI
Reader module
A1SJ71ID2-R4
AnS, QnAS bus connection, the reader to write program 2 channel connection.
Reader module
A1SJ71ID2-R4
AnS, QnAS bus connection, the reader to write program 2 channel connection.
MITSUBISHI
Pulse capture module
A1SP60
The A1SP60 pulse capture module is a 16 point DC24V input module, Can be used as a general input module, Can also be used as a pulse capture module, Pulse capture function makes the input signal width in the sequence can be as short as 0.5ms, Once there is a pulse signal input, the state is memory, A1SP60 to ensure that the control process at least once again to control the state of the memory of the operation, Input can be set to 4 blocks, Each block can be set to a general function or pulse capture function.
Pulse capture module
A1SP60
The A1SP60 pulse capture module is a 16 point DC24V input module, Can be used as a general input module, Can also be used as a pulse capture module, Pulse capture function makes the input signal width in the sequence can be as short as 0.5ms, Once there is a pulse signal input, the state is memory, A1SP60 to ensure that the control process at least once again to control the state of the memory of the operation, Input can be set to 4 blocks, Each block can be set to a general function or pulse capture function.
MITSUBISHI
Modular
A1SJ71AS92
The main unit of the AS-i system The response time of PLC is the interval between the time of the change of the external output signal of the PLC and the time of the change of the external output signal which is controlled by it, Lag time, this is the time constant of the input circuit, The time constant of the output circuit, the arrangement of the user statement and the use of the instruction, The cycle scan mode of PLC and the way of PLC to refresh the I/O and so on. This phenomenon is called the I/O delay time effect.
Modular
A1SJ71AS92
The main unit of the AS-i system The response time of PLC is the interval between the time of the change of the external output signal of the PLC and the time of the change of the external output signal which is controlled by it, Lag time, this is the time constant of the input circuit, The time constant of the output circuit, the arrangement of the user statement and the use of the instruction, The cycle scan mode of PLC and the way of PLC to refresh the I/O and so on. This phenomenon is called the I/O delay time effect.
MITSUBISHI
Modular
A1SJ71B62-S3
Signal transmission device B/NET interface device for power distribution control equipment The response time of PLC is the interval between the time of the change of the external output signal of the PLC and the time of the change of the external output signal which is controlled by it, Lag time, this is the time constant of the input circuit, The time constant of the output circuit, the arrangement of the user statement and the use of the instruction, The cycle scan mode of PLC and the way of PLC to refresh the I/O and so on. This phenomenon is called the I/O delay time effect.
Modular
A1SJ71B62-S3
Signal transmission device B/NET interface device for power distribution control equipment The response time of PLC is the interval between the time of the change of the external output signal of the PLC and the time of the change of the external output signal which is controlled by it, Lag time, this is the time constant of the input circuit, The time constant of the output circuit, the arrangement of the user statement and the use of the instruction, The cycle scan mode of PLC and the way of PLC to refresh the I/O and so on. This phenomenon is called the I/O delay time effect.
MITSUBISHI
Modular
A1SJ72J95
JEMANET (OPCN-1) interface unit from the station. The response time of PLC is the interval between the time of the change of the external output signal of the PLC and the time of the change of the external output signal which is controlled by it, Lag time, this is the time constant of the input circuit, The time constant of the output circuit, the arrangement of the user statement and the use of the instruction, The cycle scan mode of PLC and the way of PLC to refresh the I/O and so on.
Modular
A1SJ72J95
JEMANET (OPCN-1) interface unit from the station. The response time of PLC is the interval between the time of the change of the external output signal of the PLC and the time of the change of the external output signal which is controlled by it, Lag time, this is the time constant of the input circuit, The time constant of the output circuit, the arrangement of the user statement and the use of the instruction, The cycle scan mode of PLC and the way of PLC to refresh the I/O and so on.
MITSUBISHI
Modular
A1SJ71J92-S3
JEMANET (OPCN-1) interface unit master station. The response time of PLC is the interval between the time of the change of the external output signal of the PLC and the time of the change of the external output signal which is controlled by it, Lag time, this is the time constant of the input circuit, The time constant of the output circuit, the arrangement of the user statement and the use of the instruction, The cycle scan mode of PLC and the way of PLC to refresh the I/O and so on.
Modular
A1SJ71J92-S3
JEMANET (OPCN-1) interface unit master station. The response time of PLC is the interval between the time of the change of the external output signal of the PLC and the time of the change of the external output signal which is controlled by it, Lag time, this is the time constant of the input circuit, The time constant of the output circuit, the arrangement of the user statement and the use of the instruction, The cycle scan mode of PLC and the way of PLC to refresh the I/O and so on.
MITSUBISHI
Modem module
A1SJ71CMO-S3
Using a modem middle modular connector unit faces to transmit data transmission speed: 0.3-14.4kbps.
Modem module
A1SJ71CMO-S3
Using a modem middle modular connector unit faces to transmit data transmission speed: 0.3-14.4kbps.