LK Automation Limited
Brand:
MITSUBISHI
FA-TH16YRA21S Terminal module
MITSUBISHI FA-TH16YRA21S Manual And Instructions
FA-TH16YRA21S datasheetPDF datasheet
MITSUBISHI FA-TH16YRA21S Product information and technical parameters：
Brand: MITSUBISHI
Name: Terminal module
Model: FA-TH16YRA21S
Can be isolated from the output of the programmable controller, the a/b/c contact relay, SSR, Tr output.
...More relevant models >>>>
FA-TH16YRA21S datasheetPDF datasheet
MITSUBISHI FA-TH16YRA21S Product information and technical parameters：
Brand: MITSUBISHI
Name: Terminal module
Model: FA-TH16YRA21S
Can be isolated from the output of the programmable controller, the a/b/c contact relay, SSR, Tr output.
Can be isolated to obtain DC24/48/100V, AC100/200V input signal.The connector is converted to a spring clip terminal row.Can be isolated to obtain DC24/48/100V, AC100/200V input signal.RS-232.
Transmission speed: 230.4kbps.
MC protocol.
Communication protocol support function.
Can only be used on the ch1 side FA-TH16YRA21S.
Device for immediate communication
Communication protocol support function through Works2 GX,
Can easily set the required agreement with the other equipment communication FA-TH16YRA21S
In addition, only the communication protocol library is required to select the equipment to be carried out,
Immediate connection.
The creation and editing of communication protocols are simple and easy to implement, even if there is no connection equipment in the communication protocol library,
Can also simply create a corresponding protocol for communication FA-TH16YRA21S.
The content of the communication protocol that can be created in the list,
Can also be simply edited. Convert connectors to fast connectors.
According to the location of the connection equipment distribution module. Open collector output.
Axis of control: 4 FA-TH16YRA21S.
Maximum output pulse: pulse/s 200k.
Location data: 600 data / axis.
Max link distance: 2m.
With the parameter setting, the synchronization control can be easily realized. Do not need to write complex procedures.
Start / stop with synchronous control of the shaft.
Synchronous control of the axis and the positioning of the axis can coexist.
Through the clutch, the movement of the main shaft can be transferred to the output shaft.
Simple implementation of synchronization control.
Cam control is more simple
Cam data can easily create a variety of patterns.
Can be simple to achieve the gear, shaft, transmission, cam and other mechanical mechanisms to replace the software synchronization control.
It is not subject to thhe limitation of the concept of the electronic cam control so far, and can use the cam with high degree of freedom FA-TH16YRA21S.
The stroke, speed, acceleration and beat can be confirmed on the graph, and the setting is carried out at the same timee FA-TH16YRA21S.
Can also be through the cam data thumbnail display, easy to confirm the cam data has been created.
Can import and export the cam data in CSV format.
Transmission speed: 230.4kbps.
MC protocol.
Communication protocol support function.
Can only be used on the ch1 side FA-TH16YRA21S.
Device for immediate communication
Communication protocol support function through Works2 GX,
Can easily set the required agreement with the other equipment communication FA-TH16YRA21S
In addition, only the communication protocol library is required to select the equipment to be carried out,
Immediate connection.
The creation and editing of communication protocols are simple and easy to implement, even if there is no connection equipment in the communication protocol library,
Can also simply create a corresponding protocol for communication FA-TH16YRA21S.
The content of the communication protocol that can be created in the list,
Can also be simply edited. Convert connectors to fast connectors.
According to the location of the connection equipment distribution module. Open collector output.
Axis of control: 4 FA-TH16YRA21S.
Maximum output pulse: pulse/s 200k.
Location data: 600 data / axis.
Max link distance: 2m.
With the parameter setting, the synchronization control can be easily realized. Do not need to write complex procedures.
Start / stop with synchronous control of the shaft.
Synchronous control of the axis and the positioning of the axis can coexist.
Through the clutch, the movement of the main shaft can be transferred to the output shaft.
Simple implementation of synchronization control.
Cam control is more simple
Cam data can easily create a variety of patterns.
Can be simple to achieve the gear, shaft, transmission, cam and other mechanical mechanisms to replace the software synchronization control.
It is not subject to thhe limitation of the concept of the electronic cam control so far, and can use the cam with high degree of freedom FA-TH16YRA21S.
The stroke, speed, acceleration and beat can be confirmed on the graph, and the setting is carried out at the same timee FA-TH16YRA21S.
Can also be through the cam data thumbnail display, easy to confirm the cam data has been created.
Can import and export the cam data in CSV format.
...More relevant models >>>>