LK Automation Limited
Brand:
MITSUBISHI
FA-TH16YRA11S Terminal module
MITSUBISHI FA-TH16YRA11S Manual And Instructions
FA-TH16YRA11S datasheetPDF datasheet
MITSUBISHI FA-TH16YRA11S Product information and technical parameters：
Brand: MITSUBISHI
Name: Terminal module
Model: FA-TH16YRA11S
Can be isolated from the output of the programmable controller, the a/b/c contact relay, SSR, Tr output.
...More relevant models >>>>
FA-TH16YRA11S datasheetPDF datasheet
MITSUBISHI FA-TH16YRA11S Product information and technical parameters：
Brand: MITSUBISHI
Name: Terminal module
Model: FA-TH16YRA11S
Can be isolated from the output of the programmable controller, the a/b/c contact relay, SSR, Tr output.
Output points: 16 points.
Output form: source type.
Rated output voltage: DC12 ~ 24V.
Max load current: 0.5A/1 point.
Protection function: have.
Common way: 16 point / public end.
Input / output occupied points: 16 points (I/O distribution: output 16 points).
External wiring connection: 18 point terminal FA-TH16YRA11S.
The switch input and output module is a device which can collect the input / output of the switch signal,
Digital I/O modules are often called FA-TH16YRA11S
The switch signal is collected to the computer or the computer to send the relevant instructions through the RS-485 bus to control the switch of the switch,
Can also be carried out through the RS-485 bus communication,
Remote control switch.
Communication protocol is a standard Modbus protocol or custom protocol FA-TH16YRA11S. Can be used as a screw relay terminal. Negative common end useNumber of input channels: 4ch.
Input voltage: DC - 10 ~ 10V.
Input current: DC0 ~ 20mA.
Conversion speed: 40 s/2ch.
Resolution: 1/32000.
Status of connected devices by means of alarm monitoring.
Alarm output function
Process alarm.
When the digital value is in the range of preset, the output alarm FA-TH16YRA11S.
Change rate alarm.
The output value of the output value of the digital output is too large (greater than the rate of change of the alarm limit) or too small (less than the rate of change), the output alarm.
Achieve stability measurement
Inter channel isolation
Isolation between the channels, can prevent the connection of sensors in the channel between the cross talk, so as to achieve stable measurement.
High speed, smooth continuous analog output.
Waveform output function
Equipped with the industry''s first waveform output functiion FA-TH16YRA11S.
The pre prepared waveform data can be imported into the analog output module, and the function of the analog output is simulated according to the set conversion period.
It is not affected by the sequential scan time, and it can reealize the high speed and smooth analog output FA-TH16YRA11S. Can be isolated from the output of the programmable controller, the a/b/c contact relay, SSR, Tr output.
Output form: source type.
Rated output voltage: DC12 ~ 24V.
Max load current: 0.5A/1 point.
Protection function: have.
Common way: 16 point / public end.
Input / output occupied points: 16 points (I/O distribution: output 16 points).
External wiring connection: 18 point terminal FA-TH16YRA11S.
The switch input and output module is a device which can collect the input / output of the switch signal,
Digital I/O modules are often called FA-TH16YRA11S
The switch signal is collected to the computer or the computer to send the relevant instructions through the RS-485 bus to control the switch of the switch,
Can also be carried out through the RS-485 bus communication,
Remote control switch.
Communication protocol is a standard Modbus protocol or custom protocol FA-TH16YRA11S. Can be used as a screw relay terminal. Negative common end useNumber of input channels: 4ch.
Input voltage: DC - 10 ~ 10V.
Input current: DC0 ~ 20mA.
Conversion speed: 40 s/2ch.
Resolution: 1/32000.
Status of connected devices by means of alarm monitoring.
Alarm output function
Process alarm.
When the digital value is in the range of preset, the output alarm FA-TH16YRA11S.
Change rate alarm.
The output value of the output value of the digital output is too large (greater than the rate of change of the alarm limit) or too small (less than the rate of change), the output alarm.
Achieve stability measurement
Inter channel isolation
Isolation between the channels, can prevent the connection of sensors in the channel between the cross talk, so as to achieve stable measurement.
High speed, smooth continuous analog output.
Waveform output function
Equipped with the industry''s first waveform output functiion FA-TH16YRA11S.
The pre prepared waveform data can be imported into the analog output module, and the function of the analog output is simulated according to the set conversion period.
It is not affected by the sequential scan time, and it can reealize the high speed and smooth analog output FA-TH16YRA11S. Can be isolated from the output of the programmable controller, the a/b/c contact relay, SSR, Tr output.
...More relevant models >>>>