MITSUBISHI
Input / output module
A1SH42P

Enter 32 points. 2/5mA DC12/24V. Response time: 10ms.

MITSUBISHI
Input / output module
A1SH42P-S1

Enter 32 points. 5mA DC24V. Response time: 0.

MITSUBISHI
Input / output module
A1SH42-S1

Enter 64 points. Above DC7V. Response time: 16ms.

MITSUBISHI
Input / output module
A1SX48Y18

Enter 8 points. 7mA DC24V. Response time: 12ms.

MITSUBISHI
Input / output module
A1SH42

Type of input: DC leakage. Input points: 32 points. Input voltage: DC12/24.

MITSUBISHI
Input / output module
A1SX48Y58

Type of input: DC leakage. Input points: 8 points. Input voltage: DC24.

MITSUBISHI
I/O bus monitoring module
A1SS91

A1SS91 is used to insert a fixed control program in front of the user program to monitor the specific Y output. Monitoring is carried out only when the CPU is in a state of running or stopping, and the monitoring failure is monitored in the suspended state.

MITSUBISHI
High speed interrupt module
A1SI61

A1SI61 is designed to control the application of mechanical devices that require high speed response time. A1SI61 temporarily stop running in order to generate an interrupt signal when the program is running, And according to the interrupt vector to execute the corresponding interrupt handler.

MITSUBISHI
High speed counting module
A1SD62

Frequency selection: 100KHZ. Number of channels: 2 channels. Input signal: DC5/12/24, 2 to 5mA.

MITSUBISHI
High speed counting module
A1SD62DE

Number of channels: 2 channels. Input signal: DC5/12/24, 2 to 5mA.

MITSUBISHI
High speed counting module
A1SD62D

Number of channels: 2 channels. Input signal: RS422A EIA.

MITSUBISHI
High speed counting module
A1SD61

The A1SD61 high speed counting module can receive up to 50KHz of pulse signals, The signal can be counted when the input pulse is rising and the falling time is greater than 500. This component has a 32 bit signed binary count range, Counter can be preset, can also use the external signal or the control program will stop counting.