LK Automation Limited
Brand:
MITSUBISHI
Grid
List
MITSUBISHI
Melsecnet remote interface module
A1SJ72T25B
By MELSECNET/B I/O can be decentralized control. In a main PLC station this module can control up to 512 I/O points.
Melsecnet remote interface module
A1SJ72T25B
By MELSECNET/B I/O can be decentralized control. In a main PLC station this module can control up to 512 I/O points.
MITSUBISHI
Melsecnet module
A1SJ71LP21
10Mbps transmission speed, the computer as the support of the flexible manufacturing system at the plant level, the requirements of more and more data flow, High transmission speed can be guaranteed to increase the amount of transmitted data while maintaining the minimum time to transfer and receive data between programmable controllers. The response time of PLC is the interval between the time of the change of the external output signal of the PLC and the time of the change of the external output signal which is controlled by it, Lag time, this is the time constant of the input circuit, The time constant of the output circuit, the arrangement of the user statement and the use of the instruction, The cycle scan mode of PLC and the way of PLC to refresh the I/O and so on.
Melsecnet module
A1SJ71LP21
10Mbps transmission speed, the computer as the support of the flexible manufacturing system at the plant level, the requirements of more and more data flow, High transmission speed can be guaranteed to increase the amount of transmitted data while maintaining the minimum time to transfer and receive data between programmable controllers. The response time of PLC is the interval between the time of the change of the external output signal of the PLC and the time of the change of the external output signal which is controlled by it, Lag time, this is the time constant of the input circuit, The time constant of the output circuit, the arrangement of the user statement and the use of the instruction, The cycle scan mode of PLC and the way of PLC to refresh the I/O and so on.
MITSUBISHI
Melsecnet module
A1SJ71LP21GE
Using A1SJ71LP21 and A1SJ71BR11MELSECNET/10 modules, Can be any ANSCPU module to the network system. Two options can be provided; the optical cable token ring network and the coaxial cable token bus network.
Melsecnet module
A1SJ71LP21GE
Using A1SJ71LP21 and A1SJ71BR11MELSECNET/10 modules, Can be any ANSCPU module to the network system. Two options can be provided; the optical cable token ring network and the coaxial cable token bus network.
MITSUBISHI
Melsecnet interface module
A1SJ71AP21GE
PLC station distance: 2Km. Cable type: GI-62.5/125.
Melsecnet interface module
A1SJ71AP21GE
PLC station distance: 2Km. Cable type: GI-62.5/125.
MITSUBISHI
Melsecnet interface module
A1SJ71AR21
PLC station distance: 500M. Cable type: coaxial cable.
Melsecnet interface module
A1SJ71AR21
PLC station distance: 500M. Cable type: coaxial cable.
MITSUBISHI
Melsecnet interface module
A1SJ71AT21B
Cable type: twisted pair cable. The function of the MELSECNET interface module is to connect the main CPU PLC to the MELSECNET data communication system.
Melsecnet interface module
A1SJ71AT21B
Cable type: twisted pair cable. The function of the MELSECNET interface module is to connect the main CPU PLC to the MELSECNET data communication system.
MITSUBISHI
Master control module
A1SJ71PT32-S3
Cable type: cable or twisted pair. A1SJ71PT32-S3 and A1SJ71PT32-S3 are the main control module of MELSECNET/MINI-S3, The main PLC in the network can control 64 remote I/O modules.
Master control module
A1SJ71PT32-S3
Cable type: cable or twisted pair. A1SJ71PT32-S3 and A1SJ71PT32-S3 are the main control module of MELSECNET/MINI-S3, The main PLC in the network can control 64 remote I/O modules.
MITSUBISHI
Master control module
A1SJ71T32-S3
Cable type: twisted pair. A1SJ71PT32-S3 and A1SJ71PT32-S3 are the main control module of MELSECNET/MINI-S3, The main PLC in the network can control 64 remote I/O modules.
Master control module
A1SJ71T32-S3
Cable type: twisted pair. A1SJ71PT32-S3 and A1SJ71PT32-S3 are the main control module of MELSECNET/MINI-S3, The main PLC in the network can control 64 remote I/O modules.
MITSUBISHI
Main communication module
A1SJ51T64
Up to controlled I/O points: 8 point I/O combination module, up to 128 points. Use any I/O module, up to 64 points.
Main communication module
A1SJ51T64
Up to controlled I/O points: 8 point I/O combination module, up to 128 points. Use any I/O module, up to 64 points.
MITSUBISHI
Intelligent communication module
A1SD51S
A1SD51S is an intelligent communication module used in ANS series, Can use the AD51H-BASIC language to make online or offline programming on the universal terminal or computer, Multitasking can also be performed with up to two programs at high speed. PLC is the use of " sequential scanning, and constantly circulating " way to work.
Intelligent communication module
A1SD51S
A1SD51S is an intelligent communication module used in ANS series, Can use the AD51H-BASIC language to make online or offline programming on the universal terminal or computer, Multitasking can also be performed with up to two programs at high speed. PLC is the use of " sequential scanning, and constantly circulating " way to work.