LK Automation Limited
Brand:
MITSUBISHI
RY42NT2P output module
MITSUBISHI RY42NT2P Manual And Instructions
RY42NT2P datasheetPDF datasheet
MITSUBISHI RY42NT2P Product information and technical parameters：
Brand: MITSUBISHI
Name: output module
Model: RY42NT2P
Output points: 64 points.
Output form: Transistor (drain type) output.
Rated open and close voltage, current: -.
Rated load voltage: DC12 ~ 24V.
Max load current: 0.2A/ point.
Response time: 1ms.
Common way: 32 point / public end.
Protection function (overload, overheat).
External wiring connection: 40 pin connector two.
Output module with mechanical relay contact mechanism,
Including the load voltage range of the relay and can be used for the output of the DC12~24V load transistor output type.
According to the load voltage, the output points of different, choose the most suitable user needs of the module.
Preventive maintenance based on the life of relay contact.
Relay output module can accumulate the number of ON of each output point.
Through the understanding of the relay contacts of the number of times, according to the relay life of preventive maintenance.
...More relevant models >>>>
RY42NT2P datasheetPDF datasheet
MITSUBISHI RY42NT2P Product information and technical parameters：
Brand: MITSUBISHI
Name: output module
Model: RY42NT2P
Output points: 64 points.
Output form: Transistor (drain type) output.
Rated open and close voltage, current: -.
Rated load voltage: DC12 ~ 24V.
Max load current: 0.2A/ point.
Response time: 1ms.
Common way: 32 point / public end.
Protection function (overload, overheat).
External wiring connection: 40 pin connector two.
Output module with mechanical relay contact mechanism,
Including the load voltage range of the relay and can be used for the output of the DC12~24V load transistor output type.
According to the load voltage, the output points of different, choose the most suitable user needs of the module.
Preventive maintenance based on the life of relay contact.
Relay output module can accumulate the number of ON of each output point.
Through the understanding of the relay contacts of the number of times, according to the relay life of preventive maintenance.
"Axis of control: 16.
Program language: motion SFC, special instruction.
Servo program capacity: 32K.
Location points: 6400 (indirect).
Servo amplifier connection mode: SSCNET III /H (1 system).
The motion CPU module is a CPU module which can be used for positioning control, synchronization control, speed / torque control and other advanced motion control RY42NT2P.
A multi CPU system with programmable controller CPU module and motion CPU module is installed on the same substrate module,
High speed control and high precision motion control can be realized RY42NT2P
High speed data communication between CPU modules.
Programmable controller CPU module and motion CPU module with 2 kinds of CPU buffer memory,
One is the storage area of the constant period communication between the CPU module and the 0 RY42NT2P. 222ms cycle,
The other is a storage area that can perform data communication directly at any time.
The storage area of any communication can contribute to the large capacity data transfer between the CPU modules and the real-time response of the refresh data.
For example, can be a one-time transfer cam data, such as large capacity data, easy to program RY42NT2P. "The input and output module installation number: 12.
Can install module: MELSEC-Q series module.
DIN guide rail mounting adapter type: Q6DIN1.
Size (H) * (44.1mm) * (W) * (D): * 439mm * 98mm.
Substrate module for mounting various modules of MELSEC-Q series.
Extended use of Q series expansion substrates in the following extensions. "Analog input channel number: 4CH.
Available thermocouple: -.
Available temperature resistance: PT100, JPt100.
Sampling period 4CH: 250ms/500ms.
Control output cycle: 0.5s ~ 100.0s.
Input impedance: 1M.
Input filter (0: input filter OFF): 0 ~ 100s.
Sensor compensation value setting: the full range of the input range of the negative terminal to the full range of the input range.
Sensor input when the action: according to the scale of the processing.
Temperature control mode: ON/OFF PID pulse or 2 position control
Heater disconnection detection specification: there.
External wiring connection mode: 18 point screw terminal.
IQ-R MELSEC series of temperature control module to achieve a high stability and response to the temperature control.
Divided into Thermocouple Input, temperature resistance input two types of input,
These two kinds of input types are distinguished by the function of the detection of the broken line with / without heater.
Module binding function.
Combined with the use of up to 64 sets of temperature control module for temperature control. Can be combined with the function of the following two points.
Heating function between modules.
Peak current suppression function between modules.
By cooperating with the time of arrival of a number of loops, the average temperature is controlled.
Can realize the uniform temperature control, avoid partial burning control object,
Part of the phenomenon of thermal expansion. Can be divided into 116 groups, with its heating up to the time,
Reduce the overall system in heating up the waste of energy RY42NT2P.
Peak current suppression function between modules
By the time staggered output transistor, suppressing peak current.
The power supply ccapacity of the equipment can be reduced by setting a larger channel and a smaller channel of the heater in the same set RY42NT2P.
Can be divided into 5 groups.
Program language: motion SFC, special instruction.
Servo program capacity: 32K.
Location points: 6400 (indirect).
Servo amplifier connection mode: SSCNET III /H (1 system).
The motion CPU module is a CPU module which can be used for positioning control, synchronization control, speed / torque control and other advanced motion control RY42NT2P.
A multi CPU system with programmable controller CPU module and motion CPU module is installed on the same substrate module,
High speed control and high precision motion control can be realized RY42NT2P
High speed data communication between CPU modules.
Programmable controller CPU module and motion CPU module with 2 kinds of CPU buffer memory,
One is the storage area of the constant period communication between the CPU module and the 0 RY42NT2P. 222ms cycle,
The other is a storage area that can perform data communication directly at any time.
The storage area of any communication can contribute to the large capacity data transfer between the CPU modules and the real-time response of the refresh data.
For example, can be a one-time transfer cam data, such as large capacity data, easy to program RY42NT2P. "The input and output module installation number: 12.
Can install module: MELSEC-Q series module.
DIN guide rail mounting adapter type: Q6DIN1.
Size (H) * (44.1mm) * (W) * (D): * 439mm * 98mm.
Substrate module for mounting various modules of MELSEC-Q series.
Extended use of Q series expansion substrates in the following extensions. "Analog input channel number: 4CH.
Available thermocouple: -.
Available temperature resistance: PT100, JPt100.
Sampling period 4CH: 250ms/500ms.
Control output cycle: 0.5s ~ 100.0s.
Input impedance: 1M.
Input filter (0: input filter OFF): 0 ~ 100s.
Sensor compensation value setting: the full range of the input range of the negative terminal to the full range of the input range.
Sensor input when the action: according to the scale of the processing.
Temperature control mode: ON/OFF PID pulse or 2 position control
Heater disconnection detection specification: there.
External wiring connection mode: 18 point screw terminal.
IQ-R MELSEC series of temperature control module to achieve a high stability and response to the temperature control.
Divided into Thermocouple Input, temperature resistance input two types of input,
These two kinds of input types are distinguished by the function of the detection of the broken line with / without heater.
Module binding function.
Combined with the use of up to 64 sets of temperature control module for temperature control. Can be combined with the function of the following two points.
Heating function between modules.
Peak current suppression function between modules.
By cooperating with the time of arrival of a number of loops, the average temperature is controlled.
Can realize the uniform temperature control, avoid partial burning control object,
Part of the phenomenon of thermal expansion. Can be divided into 116 groups, with its heating up to the time,
Reduce the overall system in heating up the waste of energy RY42NT2P.
Peak current suppression function between modules
By the time staggered output transistor, suppressing peak current.
The power supply ccapacity of the equipment can be reduced by setting a larger channel and a smaller channel of the heater in the same set RY42NT2P.
Can be divided into 5 groups.
...More relevant models >>>>