LK Automation Limited
Brand:
MITSUBISHI
Q00JCPU-S8-SET Small points with substrate CPU
MITSUBISHI Q00JCPU-S8-SET Manual And Instructions
Q00JCPU-S8-SET datasheetPDF datasheet
Q00JCPU-S8-SET datasheetPDF datasheet
Q00JCPU-S8-SET Special InstructionsStrctured Programming Manual
Q00JCPU-S8-SET Application FunctionsStrctured Programming Manual
Q00JCPU-S8-SET Common InstructionsStrctured Programming Manual
Q00JCPU-S8-SET FundamentalsStrctured Programming Manual
Q00JCPU-S8-SET Multiple CPU SystemUser's Manual
Q00JCPU-S8-SET Function Explanation, Program FundamentalsUser's Manual
Q00JCPU-S8-SET Hardware Design, Maintenance and InspectionUser's Manual
Q00JCPU-S8-SET Structured TextProgramming Manual
Q00JCPU-S8-SET MELSAP-LProgramming Manual
Q00JCPU-S8-SET SFCProgramming Manual
Q00JCPU-S8-SET PID Control InstructionsProgramming Manual
Q00JCPU-S8-SET Common Instructions 1/2Programming Manual
Q00JCPU-S8-SET Structured Text(ST)Programming Guide Book
MITSUBISHI Q00JCPU-S8-SET Product information and technical parameters：
Brand: MITSUBISHI
Name: Small points with substrate CPU
Model: Q00JCPU-S8-SET
Input / output points: 256 points.
Program capacity: 8 K step.
Processing speed: 0.2 s.
Built in communication port: RS232*1.
Continue to go beyond, to climb the peak of Q series.
Strengthen security function.
Can be set up to 32 characters of the file password.
In addition to the English letters, numbers, but also the use of special characters,
To further enhance the security of the password.
In addition, only pre registered devices are allowed to access CPU,
To intercept unauthorized access to unauthorized users.
Therefore, it is important to prevent the outflow of important program assets and protect intellectual property rights.
CPU module expansion standard RAM (max 8MB).
Can be used with the SD memory card at the same time.
Continuous access file register.
...More relevant models >>>>
Q00JCPU-S8-SET datasheetPDF datasheet
Q00JCPU-S8-SET datasheetPDF datasheet
Q00JCPU-S8-SET Special InstructionsStrctured Programming Manual
Q00JCPU-S8-SET Application FunctionsStrctured Programming Manual
Q00JCPU-S8-SET Common InstructionsStrctured Programming Manual
Q00JCPU-S8-SET FundamentalsStrctured Programming Manual
Q00JCPU-S8-SET Multiple CPU SystemUser's Manual
Q00JCPU-S8-SET Function Explanation, Program FundamentalsUser's Manual
Q00JCPU-S8-SET Hardware Design, Maintenance and InspectionUser's Manual
Q00JCPU-S8-SET Structured TextProgramming Manual
Q00JCPU-S8-SET MELSAP-LProgramming Manual
Q00JCPU-S8-SET SFCProgramming Manual
Q00JCPU-S8-SET PID Control InstructionsProgramming Manual
Q00JCPU-S8-SET Common Instructions 1/2Programming Manual
Q00JCPU-S8-SET Structured Text(ST)Programming Guide Book
MITSUBISHI Q00JCPU-S8-SET Product information and technical parameters：
Brand: MITSUBISHI
Name: Small points with substrate CPU
Model: Q00JCPU-S8-SET
Input / output points: 256 points.
Program capacity: 8 K step.
Processing speed: 0.2 s.
Built in communication port: RS232*1.
Continue to go beyond, to climb the peak of Q series.
Strengthen security function.
Can be set up to 32 characters of the file password.
In addition to the English letters, numbers, but also the use of special characters,
To further enhance the security of the password.
In addition, only pre registered devices are allowed to access CPU,
To intercept unauthorized access to unauthorized users.
Therefore, it is important to prevent the outflow of important program assets and protect intellectual property rights.
CPU module expansion standard RAM (max 8MB).
Can be used with the SD memory card at the same time.
Continuous access file register.
Output: 6 channels.
Input (resolution): 0~4000; -4000~4000; 0~12000; -12000~12000; -16000~16000.
Output: DC-12V~12V; 0~22mA.
Conversion speed: 6ms/ channel.
40 pin connector.
Isolation between channels.
The possibility of expanding control with intelligent function.
At the same time, the channel isolation analog module realizes high isolation voltage,
Further improve the accuracy of the benchmark Q00JCPU-S8-SET Q00JCPU-S8-SET
Provide support for process control using a general purpose programmable controller.
Flow meter, pressure meter, other sensors can be directly connected to analog input,
Control valve can also be directly connected to analog output.
Hardware and installation costs have been greatly reduced due to the need for an external isolation amplifier Q00JCPU-S8-SET.
High insulation strength.
Can isolate electrical interference, such as current and noise, etc..
Standard analog input module.
Isolated analog input module.
No external isolation amplifier required.
Without the use of inter channel isolation analog modules.
Using the inter channel isolation analog module. Input: 2 channels.
10kpps.
Counter input signal: DC5/12/24V Q00JCPU-S8-SET.
External input: DC5/12/24V.
Uniform output: Transistor (drain type).
Used to replace the A series of large modules "AD61-S1".
40 pin connector.
Support high resolution devices. Pulse input and high speed counter module product group satisfying high speed and high precision control application.
High speed counter module for counting high-speed pulse train.
Can be used in combination with the external encoder for positioning and other control.
The maximum count rate can be switched, and the low frequency pulse is counted from the high speed pulse to the rising edge / falling edge.
Each 1 channel is equipped with 2 points of external uniform output.
Can be selected according to the use of "consistent output function", "continuous comparison function", to achieve high-speed control of external equipment. (QD64D2)
Provides a variety of functions, such as the same output test function (using a continuous comparison function), the default function, the latch countter function,
In order to meet the needs of various applications Q00JCPU-S8-SET. (QD64D2)
The maximum count rate of the input pulse can be up to 8Mpps (differential input, 2 phase, 4 double frequency).
Can be in the semiconductor, liquid crystal mannufacturing and other high position accuracy requirements of the equipment,
Perform accurate position tracking using high resolution encoders Q00JCPU-S8-SET. (QD65PD2)
Input (resolution): 0~4000; -4000~4000; 0~12000; -12000~12000; -16000~16000.
Output: DC-12V~12V; 0~22mA.
Conversion speed: 6ms/ channel.
40 pin connector.
Isolation between channels.
The possibility of expanding control with intelligent function.
At the same time, the channel isolation analog module realizes high isolation voltage,
Further improve the accuracy of the benchmark Q00JCPU-S8-SET Q00JCPU-S8-SET
Provide support for process control using a general purpose programmable controller.
Flow meter, pressure meter, other sensors can be directly connected to analog input,
Control valve can also be directly connected to analog output.
Hardware and installation costs have been greatly reduced due to the need for an external isolation amplifier Q00JCPU-S8-SET.
High insulation strength.
Can isolate electrical interference, such as current and noise, etc..
Standard analog input module.
Isolated analog input module.
No external isolation amplifier required.
Without the use of inter channel isolation analog modules.
Using the inter channel isolation analog module. Input: 2 channels.
10kpps.
Counter input signal: DC5/12/24V Q00JCPU-S8-SET.
External input: DC5/12/24V.
Uniform output: Transistor (drain type).
Used to replace the A series of large modules "AD61-S1".
40 pin connector.
Support high resolution devices. Pulse input and high speed counter module product group satisfying high speed and high precision control application.
High speed counter module for counting high-speed pulse train.
Can be used in combination with the external encoder for positioning and other control.
The maximum count rate can be switched, and the low frequency pulse is counted from the high speed pulse to the rising edge / falling edge.
Each 1 channel is equipped with 2 points of external uniform output.
Can be selected according to the use of "consistent output function", "continuous comparison function", to achieve high-speed control of external equipment. (QD64D2)
Provides a variety of functions, such as the same output test function (using a continuous comparison function), the default function, the latch countter function,
In order to meet the needs of various applications Q00JCPU-S8-SET. (QD64D2)
The maximum count rate of the input pulse can be up to 8Mpps (differential input, 2 phase, 4 double frequency).
Can be in the semiconductor, liquid crystal mannufacturing and other high position accuracy requirements of the equipment,
Perform accurate position tracking using high resolution encoders Q00JCPU-S8-SET. (QD65PD2)
...More relevant models >>>>