LK Automation Limited
Brand:
MITSUBISHI
NZ2MC-1MBS Extended SRAM card
MITSUBISHI NZ2MC-1MBS Manual And Instructions
NZ2MC-1MBS datasheetPDF datasheet
MITSUBISHI NZ2MC-1MBS Product information and technical parameters：
Brand: MITSUBISHI
Name: Extended SRAM card
Model: NZ2MC-1MBS
Capacity: 1MB.
...More relevant models >>>>
NZ2MC-1MBS datasheetPDF datasheet
MITSUBISHI NZ2MC-1MBS Product information and technical parameters：
Brand: MITSUBISHI
Name: Extended SRAM card
Model: NZ2MC-1MBS
Capacity: 1MB.
Operation control mode: stored procedure repeated operation.
Input / output points: 4096 points.
Program capacity: 320K.
As the core of the programmable controller control system, programmable controller CPU module has been equipped with a variety of functions,
Support multiple controls. Program capacity from the 40K step to the 1200K step, to select the most suitable system size of the CPU module NZ2MC-1MBS NZ2MC-1MBS
And the CPU module can be directly connected to the industrial network, which can reduce the construction cost of the system.
Standard interface.
The programmable controller CPU module has standard Ethernet port, USB port, SD card slot.
Ethernet port and USB port can be used to communicate with the corresponding peripheral devices,
SD memory card slot can be used to record data, databases and other data storage NZ2MC-1MBS.
In addition, the expansion of the SRAM card can be used for the expansion of the capacity of the soft element / tag memory and used as a hardware security key. Analog input channel number: 16CH.
accuracy
Ambient temperature of 25 plus or minus 5 degrees C: plus or minus 0.1%.
Ambient temperature 0 ~ 55 degrees C:- NZ2MC-1MBS.
Temperature coefficient: positive and negative 35ppm/.
Common
Conversion speed: 10ms.
Insulation between channels: isolation transformer insulation.
Absolute maximum input: positive and negative 15V, 30mA.
External wiring connection: 40 pin connector two.
Voltage input
The analog input voltage: DC - 10 - 10V.
Digital output value: 32000 ~ 32000.
Current input
Analog input current: DC0 ~ 20mA.
Digital output value: 0 ~ 32000.
Execute event driven program through alarm output
Strengthen the implementation of the interrupt function according to the alarm output flag, easy to carry out preventive maintenance.
The measured value and the change rate of the analog input signal exceed the upper and lower limits of the set,
Regardless of the procedure of the scan time, can be executed interrupt handling, quickly respond to abnormal conditions.
Analog input module for the external analog signal into the interface of the programmable controller.
Can choose the channel between the insulation, voltage input, current input, voltage / current mixed input, thermocouple input, temmperature resistance (RTD) input for a variety of purposes, such as modules NZ2MC-1MBS.
Filter high frequency interference.
Analog input module has been equipped with a first order lag filter.
The analog input signal with high frequency interferencee component can be obtained by using the first order lag filter NZ2MC-1MBS.
Parameters can be set through the filter time constant, no program can be easy to use.
Input / output points: 4096 points.
Program capacity: 320K.
As the core of the programmable controller control system, programmable controller CPU module has been equipped with a variety of functions,
Support multiple controls. Program capacity from the 40K step to the 1200K step, to select the most suitable system size of the CPU module NZ2MC-1MBS NZ2MC-1MBS
And the CPU module can be directly connected to the industrial network, which can reduce the construction cost of the system.
Standard interface.
The programmable controller CPU module has standard Ethernet port, USB port, SD card slot.
Ethernet port and USB port can be used to communicate with the corresponding peripheral devices,
SD memory card slot can be used to record data, databases and other data storage NZ2MC-1MBS.
In addition, the expansion of the SRAM card can be used for the expansion of the capacity of the soft element / tag memory and used as a hardware security key. Analog input channel number: 16CH.
accuracy
Ambient temperature of 25 plus or minus 5 degrees C: plus or minus 0.1%.
Ambient temperature 0 ~ 55 degrees C:- NZ2MC-1MBS.
Temperature coefficient: positive and negative 35ppm/.
Common
Conversion speed: 10ms.
Insulation between channels: isolation transformer insulation.
Absolute maximum input: positive and negative 15V, 30mA.
External wiring connection: 40 pin connector two.
Voltage input
The analog input voltage: DC - 10 - 10V.
Digital output value: 32000 ~ 32000.
Current input
Analog input current: DC0 ~ 20mA.
Digital output value: 0 ~ 32000.
Execute event driven program through alarm output
Strengthen the implementation of the interrupt function according to the alarm output flag, easy to carry out preventive maintenance.
The measured value and the change rate of the analog input signal exceed the upper and lower limits of the set,
Regardless of the procedure of the scan time, can be executed interrupt handling, quickly respond to abnormal conditions.
Analog input module for the external analog signal into the interface of the programmable controller.
Can choose the channel between the insulation, voltage input, current input, voltage / current mixed input, thermocouple input, temmperature resistance (RTD) input for a variety of purposes, such as modules NZ2MC-1MBS.
Filter high frequency interference.
Analog input module has been equipped with a first order lag filter.
The analog input signal with high frequency interferencee component can be obtained by using the first order lag filter NZ2MC-1MBS.
Parameters can be set through the filter time constant, no program can be easy to use.
...More relevant models >>>>