LK Automation Limited
Brand:
MITSUBISHI
GT2708-VTBD-GF 8.4 Inch Touch Screen
MITSUBISHI GT2708-VTBD-GF Manual And Instructions
GT2708-VTBD-GF datasheetPDF datasheet
GT2708-VTBD-GF MES Interface Function Manual
GT2708-VTBD-GF Microcomputers, MODBUS/Fieldbus Products, PeripheralsConnection Manual
GT2708-VTBD-GF Non-Mitsubishi Products 2Connection Manual
GT2708-VTBD-GF Non-Mitsubishi Products 1Connection Manual
GT2708-VTBD-GF Mitsubishi ProductsConnection Manual
GT2708-VTBD-GF MonitorUser's Manual
GT2708-VTBD-GF UtilityUser's Manual
GT2708-VTBD-GF HardwareUser's Manual
MITSUBISHI GT2708-VTBD-GF Product information and technical parameters：
Brand: MITSUBISHI
Name: 8.4 Inch Touch Screen
Model: GT2708-VTBD-GF
Function: high performance and low price in the middle end model.
Picture size: 8.4 inches.
Resolution: VGA.
Display: TFT color.
Panel color: black.
Power type: DC24V.
Communication interface: CC-Link IE network communication module set.
The highest level model with multi touch and gesture features.
Specification rich, design at ease.
GT27 standard supports SD memory card and standard equipped with Ethernet, RS-232, RS-422/485, host/device USB interface.
Even in the log, script, alarm, soft component data transmission, such as high load processing period, but also to achieve smooth operation of the screen.
In addition, also supports video, animation playback, video input and RGB input and output, can use all the features of GOT2000.
Can be programmed CPU and other procedures, parameters, such as data storage (backup) to the SD GOT memory card, USB memory.
When the programmable controller fails, batch write back (recovery) program.
1, the human body sensor
People will be able to automatically detect and display the picture.
2, USB interface: device USB (Mini-B USB)
Can connect to the computer to transfer data.
3, USB interface: host USB (USB-A)
GOT data can be transmitted through the USB memory or read log data and other data,
Can also be connected to the USB mouse, keyboard use.
4, the extension of the interface
Communication module and optional module can be installed.
5, Ethernet interface
Up to 4 different manufacturers can be connected to the FA machine.
6, RS-232 interface
Can connect all kinds of FA machine, bar code reader, serial printer.
7, RS-422/485 interface
Can be connected to a variety of FA machines, bar code reader.
8, SD memory card slot
Can save alarm and log data, such as a large number of data.
...More relevant models >>>>
GT2708-VTBD-GF datasheetPDF datasheet
GT2708-VTBD-GF MES Interface Function Manual
GT2708-VTBD-GF Microcomputers, MODBUS/Fieldbus Products, PeripheralsConnection Manual
GT2708-VTBD-GF Non-Mitsubishi Products 2Connection Manual
GT2708-VTBD-GF Non-Mitsubishi Products 1Connection Manual
GT2708-VTBD-GF Mitsubishi ProductsConnection Manual
GT2708-VTBD-GF MonitorUser's Manual
GT2708-VTBD-GF UtilityUser's Manual
GT2708-VTBD-GF HardwareUser's Manual
MITSUBISHI GT2708-VTBD-GF Product information and technical parameters：
Brand: MITSUBISHI
Name: 8.4 Inch Touch Screen
Model: GT2708-VTBD-GF
Function: high performance and low price in the middle end model.
Picture size: 8.4 inches.
Resolution: VGA.
Display: TFT color.
Panel color: black.
Power type: DC24V.
Communication interface: CC-Link IE network communication module set.
The highest level model with multi touch and gesture features.
Specification rich, design at ease.
GT27 standard supports SD memory card and standard equipped with Ethernet, RS-232, RS-422/485, host/device USB interface.
Even in the log, script, alarm, soft component data transmission, such as high load processing period, but also to achieve smooth operation of the screen.
In addition, also supports video, animation playback, video input and RGB input and output, can use all the features of GOT2000.
Can be programmed CPU and other procedures, parameters, such as data storage (backup) to the SD GOT memory card, USB memory.
When the programmable controller fails, batch write back (recovery) program.
1, the human body sensor
People will be able to automatically detect and display the picture.
2, USB interface: device USB (Mini-B USB)
Can connect to the computer to transfer data.
3, USB interface: host USB (USB-A)
GOT data can be transmitted through the USB memory or read log data and other data,
Can also be connected to the USB mouse, keyboard use.
4, the extension of the interface
Communication module and optional module can be installed.
5, Ethernet interface
Up to 4 different manufacturers can be connected to the FA machine.
6, RS-232 interface
Can connect all kinds of FA machine, bar code reader, serial printer.
7, RS-422/485 interface
Can be connected to a variety of FA machines, bar code reader.
8, SD memory card slot
Can save alarm and log data, such as a large number of data.
For analog RGB output 1ch (slim module).
Applicable model: GT27. 5.7 inches.
Surface treatment: transparent.
Protective film color: No.
USB protection cover parts: there is an opening.
Set number: 5.
Applicable model: GT27. For video input (NTCS/PAL) 1 channels.
Applicable model: GT15. A series of high performance models that are widely used in network or single machine work environments GT2708-VTBD-GF GT2708-VTBD-GF
Screen size: 12.1 inches.
Display color: 256 color or more color.
Mounting type: panel mounting type.
Resolution: SVGA (800 x 600).
Display device: TFT color (high brightness, wide viewing angle).
Host frame color: black.
Power type: AC100~240V.
Communication interface: with built-in RS-422.
Ideal model for high performance in a network or independent operation environment GT2708-VTBD-GF.
User storage capacity: 9MB (GT15__-VNB_:5MB).
Device USB port.
Standard RS-232 interface.
Support video /RGB unit.
If the capacitive touch screen is in the middle of the operation, the display resolution or display mode of the touch screen is changed again,
Or the refresh rate of the touch screen controller is adjusted by itself, and the cursor and the touch point can not be felt when the cursor is not corresponding to the touch point,
Must be re calibrated to the touch screen system GT2708-VTBD-GF.
In order to ensure the normal operation of the touch screen system, in addition to ensure the proper installation of the system software,
Must also remember that in a host do not install two or more than two kinds of touch screen driver,
This will cause the system to run in conflict, so that the touch screen system can not be used properly. For QCPU (Q) / transport controller CPU (Q Series) tthe bus (2 channel) thin type unit GT2708-VTBD-GF.
Applicable models: GT15, GT16, GT27, GT25. Cable length: 1m.
The connection between the FXCPU (MINI-DIN8 pin connector) and the graphic operation terminal.
Connection between FXCPU communication funnction extension board (MINI-DIN8 pin connector) and GOT GT2708-VTBD-GF.
The unit can not be used with FX1NC, FX2NC, FX3UC-D/DSS, FX3G.
Applicable models: GT10, GT21.
Applicable model: GT27. 5.7 inches.
Surface treatment: transparent.
Protective film color: No.
USB protection cover parts: there is an opening.
Set number: 5.
Applicable model: GT27. For video input (NTCS/PAL) 1 channels.
Applicable model: GT15. A series of high performance models that are widely used in network or single machine work environments GT2708-VTBD-GF GT2708-VTBD-GF
Screen size: 12.1 inches.
Display color: 256 color or more color.
Mounting type: panel mounting type.
Resolution: SVGA (800 x 600).
Display device: TFT color (high brightness, wide viewing angle).
Host frame color: black.
Power type: AC100~240V.
Communication interface: with built-in RS-422.
Ideal model for high performance in a network or independent operation environment GT2708-VTBD-GF.
User storage capacity: 9MB (GT15__-VNB_:5MB).
Device USB port.
Standard RS-232 interface.
Support video /RGB unit.
If the capacitive touch screen is in the middle of the operation, the display resolution or display mode of the touch screen is changed again,
Or the refresh rate of the touch screen controller is adjusted by itself, and the cursor and the touch point can not be felt when the cursor is not corresponding to the touch point,
Must be re calibrated to the touch screen system GT2708-VTBD-GF.
In order to ensure the normal operation of the touch screen system, in addition to ensure the proper installation of the system software,
Must also remember that in a host do not install two or more than two kinds of touch screen driver,
This will cause the system to run in conflict, so that the touch screen system can not be used properly. For QCPU (Q) / transport controller CPU (Q Series) tthe bus (2 channel) thin type unit GT2708-VTBD-GF.
Applicable models: GT15, GT16, GT27, GT25. Cable length: 1m.
The connection between the FXCPU (MINI-DIN8 pin connector) and the graphic operation terminal.
Connection between FXCPU communication funnction extension board (MINI-DIN8 pin connector) and GOT GT2708-VTBD-GF.
The unit can not be used with FX1NC, FX2NC, FX3UC-D/DSS, FX3G.
Applicable models: GT10, GT21.
...More relevant models >>>>