LK Automation Limited
Brand:
MITSUBISHI
GT1665M-VTBA 8.4 Inch Touch Screen
MITSUBISHI GT1665M-VTBA Manual And Instructions
GT1665M-VTBA datasheetPDF datasheet
GT1665M-VTBA User's Manual
GT1665M-VTBA MES Interface Function Manual
GT1665M-VTBA Gateway Functions Manual
GT1665M-VTBA Extended/Option Functions Manual
GT1665M-VTBA Mitsubishi plc ConnectionsConnection Manual
GT1665M-VTBA Connection Manual
MITSUBISHI GT1665M-VTBA Product information and technical parameters：
Brand: MITSUBISHI
Name: 8.4 Inch Touch Screen
Model: GT1665M-VTBA
Series: multimedia and advanced features and features of a variety of high-performance models.
Screen size: 8.4 inches.
Display color: 256 color or more color.
Installation type: compatible with multimedia and video /RGB.
Resolution: VGA (640 x 480).
Display device: TFT color (high brightness, wide viewing angle).
Host frame color: black.
Power type: AC100~240V.
Communication interface: with built-in RS-422.
High performance models with multimedia and advanced features and functionality (including embedded communications capabilities).
User storage capacity: 15MB (GT16__-VNB__:11MB).
With HOST USB and device USB port.
Standard Ethernet, RS-422/485 and RS-232 ports.
Support multimedia and video /RGB units.
Analog touch panel.
Do not let the touch screen surface with water drops or other soft things stick to the surface,
Otherwise, the touch screen is easy to mistake that there is a hand touch caused by surface acoustic wave screen is not allowed.
In addition to cleaning the dirt on the surface of the touch screen,
You can use a soft dry cloth or a cleaning agent to clean out the center of the screen carefully,
Or use a dry soft cloth dipped in industrial alcohol or glass cleaning fluid to clean the touch screen surface.
Touch screen response is slow if you use a hand or other touch to touch the surface acoustic wave touch screen,
This shows that it is likely that the touch screen system has been obsolete, the internal clock frequency is too low,
Or because there is water in the surface of the touch screen to make the touch screen mobile, rapid response recovery,
To replace or upgrade the system must, or use dry cloth touch screen on the surface of the water.
If the user is operating the touch screen, the direction of the touch move is to the left,
But the cursor of the system moves to the right,
The failure may be due to the connection of the control box and the touch screen connected to the connector or the touch screen,
Users as long as the direction of the re exchange of it.
...More relevant models >>>>
GT1665M-VTBA datasheetPDF datasheet
GT1665M-VTBA User's Manual
GT1665M-VTBA MES Interface Function Manual
GT1665M-VTBA Gateway Functions Manual
GT1665M-VTBA Extended/Option Functions Manual
GT1665M-VTBA Mitsubishi plc ConnectionsConnection Manual
GT1665M-VTBA Connection Manual
MITSUBISHI GT1665M-VTBA Product information and technical parameters：
Brand: MITSUBISHI
Name: 8.4 Inch Touch Screen
Model: GT1665M-VTBA
Series: multimedia and advanced features and features of a variety of high-performance models.
Screen size: 8.4 inches.
Display color: 256 color or more color.
Installation type: compatible with multimedia and video /RGB.
Resolution: VGA (640 x 480).
Display device: TFT color (high brightness, wide viewing angle).
Host frame color: black.
Power type: AC100~240V.
Communication interface: with built-in RS-422.
High performance models with multimedia and advanced features and functionality (including embedded communications capabilities).
User storage capacity: 15MB (GT16__-VNB__:11MB).
With HOST USB and device USB port.
Standard Ethernet, RS-422/485 and RS-232 ports.
Support multimedia and video /RGB units.
Analog touch panel.
Do not let the touch screen surface with water drops or other soft things stick to the surface,
Otherwise, the touch screen is easy to mistake that there is a hand touch caused by surface acoustic wave screen is not allowed.
In addition to cleaning the dirt on the surface of the touch screen,
You can use a soft dry cloth or a cleaning agent to clean out the center of the screen carefully,
Or use a dry soft cloth dipped in industrial alcohol or glass cleaning fluid to clean the touch screen surface.
Touch screen response is slow if you use a hand or other touch to touch the surface acoustic wave touch screen,
This shows that it is likely that the touch screen system has been obsolete, the internal clock frequency is too low,
Or because there is water in the surface of the touch screen to make the touch screen mobile, rapid response recovery,
To replace or upgrade the system must, or use dry cloth touch screen on the surface of the water.
If the user is operating the touch screen, the direction of the touch move is to the left,
But the cursor of the system moves to the right,
The failure may be due to the connection of the control box and the touch screen connected to the connector or the touch screen,
Users as long as the direction of the re exchange of it.
Cable length: 1.5m.
For the connection between A/QnACPU and GOT.
Connection between a power supply and an operating switch and a GOT.
Applicable model: HandyGOT. D-STN color / monochrome LCD man-machine interface to replace the backlight.
Applicable model: A970GOT-SB_/LB_. Oil resistant cap for 10.4 inch screen GT1665M-VTBA.
Applicable model: GT16. Conversion connector between D-sub 9 pin head and European pin 5 pin GT1665M-VTBA
Applicable models: GT11, GT10. Accessories for 10.4 inch models.
Applicable models: GT16, GT15. Series introduction: set a number of basic functions in a small body model.
Screen size: 4.5 inches.
Display color: monochrome.
Mounting type: panel mounting type.
Resolution: 288 * 96.
Display device: STN monochrome GT1665M-VTBA.
Host frame color: white.
Power type: DC24V.
Communication interface: with built-in RS-232.
Set a number of basic functions in a compact type.
GT1055/GT1050/GT1045/GT1040:
User storage capacity: 3MB.
Device USB port.
The standard RS-422/485 and RS-232 interface.
GT1030/GT1020:
User storage capacity: 1.5MB (gt1030) /512kb (gt1020).
Three color LED backlight design, equipment status at a glance GT1665M-VTBA.
The standard RS-422/485 or RS-232 interface.
Touch screen, also known as touch screen, touch panel, is a kind of induction type liquid crystal display device can receive contacts and other input signals,
When touching the screen button on the screen,
The tactile feedback system on the screen can drive various connecting devices according to the pre programmed program,
Can be used to replace the mechanical button panel, and by the liquid crystal display screen to create the image of the effect of birth. 5.7 inches.
Surface treatment: anti refflective film GT1665M-VTBA.
Protective film color: No.
USB protection cover parts: there is an opening.
Set number: 5.
Applicable model: GT27. Cable length: 3.0m.
For the connection between the two graphic operations.
Applicable models: GT16, GT15, GT11 GT1665M-VTBA. QCPU (Q mode) bus connection.
1 joint.
Applicable model: A956WGOT. Storage capacity: 32MB.
Applicable models: A985 (-V) /A975/A970/A960GOT (-B).
For the connection between A/QnACPU and GOT.
Connection between a power supply and an operating switch and a GOT.
Applicable model: HandyGOT. D-STN color / monochrome LCD man-machine interface to replace the backlight.
Applicable model: A970GOT-SB_/LB_. Oil resistant cap for 10.4 inch screen GT1665M-VTBA.
Applicable model: GT16. Conversion connector between D-sub 9 pin head and European pin 5 pin GT1665M-VTBA
Applicable models: GT11, GT10. Accessories for 10.4 inch models.
Applicable models: GT16, GT15. Series introduction: set a number of basic functions in a small body model.
Screen size: 4.5 inches.
Display color: monochrome.
Mounting type: panel mounting type.
Resolution: 288 * 96.
Display device: STN monochrome GT1665M-VTBA.
Host frame color: white.
Power type: DC24V.
Communication interface: with built-in RS-232.
Set a number of basic functions in a compact type.
GT1055/GT1050/GT1045/GT1040:
User storage capacity: 3MB.
Device USB port.
The standard RS-422/485 and RS-232 interface.
GT1030/GT1020:
User storage capacity: 1.5MB (gt1030) /512kb (gt1020).
Three color LED backlight design, equipment status at a glance GT1665M-VTBA.
The standard RS-422/485 or RS-232 interface.
Touch screen, also known as touch screen, touch panel, is a kind of induction type liquid crystal display device can receive contacts and other input signals,
When touching the screen button on the screen,
The tactile feedback system on the screen can drive various connecting devices according to the pre programmed program,
Can be used to replace the mechanical button panel, and by the liquid crystal display screen to create the image of the effect of birth. 5.7 inches.
Surface treatment: anti refflective film GT1665M-VTBA.
Protective film color: No.
USB protection cover parts: there is an opening.
Set number: 5.
Applicable model: GT27. Cable length: 3.0m.
For the connection between the two graphic operations.
Applicable models: GT16, GT15, GT11 GT1665M-VTBA. QCPU (Q mode) bus connection.
1 joint.
Applicable model: A956WGOT. Storage capacity: 32MB.
Applicable models: A985 (-V) /A975/A970/A960GOT (-B).
...More relevant models >>>>