LK Automation Limited
Brand:
MITSUBISHI
GT1585V-STBA 12.1 Inch Touch Screen
MITSUBISHI GT1585V-STBA Manual And Instructions
GT1585V-STBA datasheetPDF datasheet
GT1585V-STBA MES Interface Function Manual
GT1585V-STBA Gateway Functions Manual
GT1585V-STBA Extended/Option Functions Manual
GT1585V-STBA Mitsubishi plc ConnectionsConnection Manual
GT1585V-STBA User's Manual
GT1585V-STBA Connection Manual
GT1585V-STBA User's Manual
MITSUBISHI GT1585V-STBA Product information and technical parameters：
Brand: MITSUBISHI
Name: 12.1 Inch Touch Screen
Model: GT1585V-STBA
A series of high performance models that are widely used in network or single machine work environments.
Screen size: 12.1 inches.
Display color: 256 color or more color.
Installation type: compatible with video /RGB.
Resolution: SVGA (800 x 600).
Display device: TFT color (high brightness, wide viewing angle).
Host frame color: black.
Power type: AC100~240V.
Communication interface: with built-in RS-422.
Ideal model for high performance in a network or independent operation environment.
User storage capacity: 9MB (GT15__-VNB_:5MB).
Device USB port.
Standard RS-232 interface.
Support video /RGB unit.
If the capacitive touch screen is in the middle of the operation, the display resolution or display mode of the touch screen is changed again,
Or the refresh rate of the touch screen controller is adjusted by itself, and the cursor and the touch point can not be felt when the cursor is not corresponding to the touch point,
Must be re calibrated to the touch screen system.
In order to ensure the normal operation of the touch screen system, in addition to ensure the proper installation of the system software,
Must also remember that in a host do not install two or more than two kinds of touch screen driver,
This will cause the system to run in conflict, so that the touch screen system can not be used properly.
...More relevant models >>>>
GT1585V-STBA datasheetPDF datasheet
GT1585V-STBA MES Interface Function Manual
GT1585V-STBA Gateway Functions Manual
GT1585V-STBA Extended/Option Functions Manual
GT1585V-STBA Mitsubishi plc ConnectionsConnection Manual
GT1585V-STBA User's Manual
GT1585V-STBA Connection Manual
GT1585V-STBA User's Manual
MITSUBISHI GT1585V-STBA Product information and technical parameters：
Brand: MITSUBISHI
Name: 12.1 Inch Touch Screen
Model: GT1585V-STBA
A series of high performance models that are widely used in network or single machine work environments.
Screen size: 12.1 inches.
Display color: 256 color or more color.
Installation type: compatible with video /RGB.
Resolution: SVGA (800 x 600).
Display device: TFT color (high brightness, wide viewing angle).
Host frame color: black.
Power type: AC100~240V.
Communication interface: with built-in RS-422.
Ideal model for high performance in a network or independent operation environment.
User storage capacity: 9MB (GT15__-VNB_:5MB).
Device USB port.
Standard RS-232 interface.
Support video /RGB unit.
If the capacitive touch screen is in the middle of the operation, the display resolution or display mode of the touch screen is changed again,
Or the refresh rate of the touch screen controller is adjusted by itself, and the cursor and the touch point can not be felt when the cursor is not corresponding to the touch point,
Must be re calibrated to the touch screen system.
In order to ensure the normal operation of the touch screen system, in addition to ensure the proper installation of the system software,
Must also remember that in a host do not install two or more than two kinds of touch screen driver,
This will cause the system to run in conflict, so that the touch screen system can not be used properly.
Series Name: A953GOT.
Size: 6 inches.
Resolution: 320 * 240.
Display device: STN monochrome display.
Display color: monochrome (white and black).
Power supply: DC24V.
The built-in RS-232 communication interface.
Memory card: 3M.
Design any machine interface, generally have to consider the system response time, user assistance mechanism, error information processing and command mode four aspects GT1585V-STBA GT1585V-STBA
System response time is too long to be the most users in the interactive system,
In addition to the absolute length of the response time, the user is also very concerned about the difference in response to different commands in response time,
If too wide users will be difficult to accept; user assistance mechanism should be integrated,
Avoid overlay systems that cause users to turn to a guide and have to browse a large number of irrelevant information;
Error and warning information must be selected in terms of user''s clarity and meaning,
At the same time, it should be as far as possible to provide some suggestions on the recovery of errors GT1585V-STBA.
In addition, when the error message is displayed, the effect is better if it is supplemented by the auditory (Bell) and visual (special color) stimulus;
Command mode is the best menu and keyboard commands, for the user to choose GT1585V-STBA. Cable length: 3 meters.
For GOT and parallel printer connection. Coaxial bus unit.
Applicable models: GT15, GT16, GT27, GT25. 15 inches.
Applicable model: GT27. Accessories for 8.4 inch models.
Applicable models: GT16, GT15. Cable length: 5 meters.
For connection between GOT and CRT. TFT color LCD touch screen to replace the backlight.
Applicable models: A975/970GOT-TBA, A975/970GOT-TBD. For video input (NTCCS/PAL) 1 channels GT1585V-STBA.
Applicable model: GT15. RS-422 connection (QnA/A/FXCPU direct connection, computer connection, micro computer connection).
No clock function.
Applicable model: A956WGOT. Used to install SD storage cards.
Applicable mmodel: GT21 GT1585V-STBA. Cable length: 5.0m.
For the connection between QnAS/AnSCPU/ motion controller GOT (A Series) and CPU.
Applicable models: GT16, GT15, GT11.
Size: 6 inches.
Resolution: 320 * 240.
Display device: STN monochrome display.
Display color: monochrome (white and black).
Power supply: DC24V.
The built-in RS-232 communication interface.
Memory card: 3M.
Design any machine interface, generally have to consider the system response time, user assistance mechanism, error information processing and command mode four aspects GT1585V-STBA GT1585V-STBA
System response time is too long to be the most users in the interactive system,
In addition to the absolute length of the response time, the user is also very concerned about the difference in response to different commands in response time,
If too wide users will be difficult to accept; user assistance mechanism should be integrated,
Avoid overlay systems that cause users to turn to a guide and have to browse a large number of irrelevant information;
Error and warning information must be selected in terms of user''s clarity and meaning,
At the same time, it should be as far as possible to provide some suggestions on the recovery of errors GT1585V-STBA.
In addition, when the error message is displayed, the effect is better if it is supplemented by the auditory (Bell) and visual (special color) stimulus;
Command mode is the best menu and keyboard commands, for the user to choose GT1585V-STBA. Cable length: 3 meters.
For GOT and parallel printer connection. Coaxial bus unit.
Applicable models: GT15, GT16, GT27, GT25. 15 inches.
Applicable model: GT27. Accessories for 8.4 inch models.
Applicable models: GT16, GT15. Cable length: 5 meters.
For connection between GOT and CRT. TFT color LCD touch screen to replace the backlight.
Applicable models: A975/970GOT-TBA, A975/970GOT-TBD. For video input (NTCCS/PAL) 1 channels GT1585V-STBA.
Applicable model: GT15. RS-422 connection (QnA/A/FXCPU direct connection, computer connection, micro computer connection).
No clock function.
Applicable model: A956WGOT. Used to install SD storage cards.
Applicable mmodel: GT21 GT1585V-STBA. Cable length: 5.0m.
For the connection between QnAS/AnSCPU/ motion controller GOT (A Series) and CPU.
Applicable models: GT16, GT15, GT11.
...More relevant models >>>>