LK Automation Limited
Brand:
MITSUBISHI
FX2N-8AV-BD Expansion board
MITSUBISHI FX2N-8AV-BD Manual And Instructions
FX2N-8AV-BD datasheetPDF datasheet
MITSUBISHI FX2N-8AV-BD Product information and technical parameters：
Brand: MITSUBISHI
Name: Expansion board
Model: FX2N-8AV-BD
8 point analog potentiometer function expansion board.
...More relevant models >>>>
FX2N-8AV-BD datasheetPDF datasheet
MITSUBISHI FX2N-8AV-BD Product information and technical parameters：
Brand: MITSUBISHI
Name: Expansion board
Model: FX2N-8AV-BD
8 point analog potentiometer function expansion board.
Memory format: EEPROM.
Number of steps: up to 16000 steps can be used.
Battery support: do not.
Method for writing and deleting: the device is installed on the PLC, and is written and deleted by the peripheral device.
Note: built-in extension. Input and output points: 32 points.
Power supply: DC24V.
Input points: 16 points FX2N-8AV-BD.
Input specification: leakage type.
Output points: 16 points.
Output form: transistor output (drain) FX2N-8AV-BD
Power consumption: 8W.
Weight: 0.2KG.
Outline dimension: 34x90x87mm.
Ultra compact model.
Basic unit: 32.
FX3GC is a connector type of compact PLC,
In the same performance with the FX3GA/FX3G can also save space, the provincial connection.
Compact third generation standard model FX2N-8AV-BD.
Connector type provincial space and provincial connection.
Suitable for small scale control of high cost.
Control points to 128 points, the use of CC-Link remote I/O can control the maximum 256 points.
N product details
Built in CPU, power supply, input and output.
Connector type input and output, the FX3 series of functions to compact body internal condensation. Max input / output points: 80 points FX2N-8AV-BD.
Power supply voltage: 24VDC.
Input points: 40 points.
Output points: 40 points.
Output type: relay.
Power consumption: 40W.
Weight (kg):1.2.
Size (WxHxD) mm:285x90x87.
Clock function and hour meter function, all of the PLC FX2N has a real-time clock standard.
Continuous scanning function, to define the operation cycle for the application of the continuous scan time.
Input filter adjustment function, you can use the input filter to smooth the input signal (in the basic unit x000 to x017).
Note recording function, Component annotation can be recorded in the program register.
Since the FX2n series have the following features: the maximum range of inclusive of the standard features, program execution faster, the full complement of communication function, suitable for different countries in the world, and the power to meet a large number of special function modules of individual needs,
It can provide maximum flexibility and control capability for your factory automation applications.
Control 16~256 point.
Built in 8K capacity of the RAM memory, the maximum can be extended to 16K.
CPU arithmetic processing speed of 0.08 S/ basic instructions.
On the right side of the FX2N series can be connected to the input and output expansion modules and special function modules FX2N-8AV-BD.
The basic unit is built in the 2 axis independent maximum 20kHz positioning function (transistor output type).
Quick disconnect the terminal block, which adopts excellent maintainability to quickly disconnect the terminal blocks, even if the cable is then replaced by the cable FX2N-8AV-BD.
Number of steps: up to 16000 steps can be used.
Battery support: do not.
Method for writing and deleting: the device is installed on the PLC, and is written and deleted by the peripheral device.
Note: built-in extension. Input and output points: 32 points.
Power supply: DC24V.
Input points: 16 points FX2N-8AV-BD.
Input specification: leakage type.
Output points: 16 points.
Output form: transistor output (drain) FX2N-8AV-BD
Power consumption: 8W.
Weight: 0.2KG.
Outline dimension: 34x90x87mm.
Ultra compact model.
Basic unit: 32.
FX3GC is a connector type of compact PLC,
In the same performance with the FX3GA/FX3G can also save space, the provincial connection.
Compact third generation standard model FX2N-8AV-BD.
Connector type provincial space and provincial connection.
Suitable for small scale control of high cost.
Control points to 128 points, the use of CC-Link remote I/O can control the maximum 256 points.
N product details
Built in CPU, power supply, input and output.
Connector type input and output, the FX3 series of functions to compact body internal condensation. Max input / output points: 80 points FX2N-8AV-BD.
Power supply voltage: 24VDC.
Input points: 40 points.
Output points: 40 points.
Output type: relay.
Power consumption: 40W.
Weight (kg):1.2.
Size (WxHxD) mm:285x90x87.
Clock function and hour meter function, all of the PLC FX2N has a real-time clock standard.
Continuous scanning function, to define the operation cycle for the application of the continuous scan time.
Input filter adjustment function, you can use the input filter to smooth the input signal (in the basic unit x000 to x017).
Note recording function, Component annotation can be recorded in the program register.
Since the FX2n series have the following features: the maximum range of inclusive of the standard features, program execution faster, the full complement of communication function, suitable for different countries in the world, and the power to meet a large number of special function modules of individual needs,
It can provide maximum flexibility and control capability for your factory automation applications.
Control 16~256 point.
Built in 8K capacity of the RAM memory, the maximum can be extended to 16K.
CPU arithmetic processing speed of 0.08 S/ basic instructions.
On the right side of the FX2N series can be connected to the input and output expansion modules and special function modules FX2N-8AV-BD.
The basic unit is built in the 2 axis independent maximum 20kHz positioning function (transistor output type).
Quick disconnect the terminal block, which adopts excellent maintainability to quickly disconnect the terminal blocks, even if the cable is then replaced by the cable FX2N-8AV-BD.
...More relevant models >>>>