LK Automation Limited
Brand:
MITSUBISHI
A1SC01B Extension cable
MITSUBISHI A1SC01B Manual And Instructions
A1SC01B datasheetPDF datasheet
MITSUBISHI A1SC01B Product information and technical parameters：
Brand: MITSUBISHI
Name: Extension cable
Model: A1SC01B
Cable length: 0.055 meters.
Extending cable to connect CPU main substrate and extended substrate,
According to the model can provide different cable length,
If you need to connect the AnN type expansion substrate is required,
Selection of A1SC05NB (A1SC07NB) cable.
...More relevant models >>>>
A1SC01B datasheetPDF datasheet
MITSUBISHI A1SC01B Product information and technical parameters：
Brand: MITSUBISHI
Name: Extension cable
Model: A1SC01B
Cable length: 0.055 meters.
Extending cable to connect CPU main substrate and extended substrate,
According to the model can provide different cable length,
If you need to connect the AnN type expansion substrate is required,
Selection of A1SC05NB (A1SC07NB) cable.
Type of input: DC leakage.
Input points: 32 points.
Input voltage: DC12/24.
Input current: 3/7mA.
Output type: transistor drain type.
Output points: 32 points.
Common public end points: 32.
PLC is introduced by the relay control technology after the development of micro processing technology,
Can be easily and reliably used for switching control A1SC01B.
As the analog quantity can be converted into digital quantity, the number of digital quantity is just a number of switching value,
Therefore, after the conversion of analog, PLC can also be reliable for processing control A1SC01B
Because the continuous production process often has the analog quantity, the analog quantity control is sometimes called process control A1SC01B.
Analog quantity is not electricity, and PLC can only handle digital quantity, quantity of electricity.
All to realize the conversion between them to have the sensor, the analog quantity into a number of power.
If this power is not standard, but also through the transmitter,
The non-standard power into a standard electrical signal, such as 1-5V, 4-20mA, 0-10V, etc..
At the same time, there is also an analog input unit (A/D),
Transform these standard electrical signals into digital signals,
The analog output unit (D/A), in order to transform the digital quantity after PLC processing into analog quantity -- standard electric signal A1SC01B.
So the standard telecommunication number, the conversion between the number of operations to use a variety of computing.
This requires the resolution of the analog unit and the standard electrical signal. Using A6SIM-X64Y64 simulation I/O module in the system before the connection can be carried out to control the process oof debugging A1SC01B.
The simulation unit consists of 16 blocks of 4 switches and 4 LED LEDs. A1SG60 is an empty cover that is used to plug in the unused I/O slot on the main board or on the extended board.
A1SG60 is a reserved dummy module I/O poinnt to PLC extended I/O system A1SC01B.
With the switch on the module can be set to retain the I/O point,
Can set 16 points, 32 points, 48 points and 64 points.
Input points: 32 points.
Input voltage: DC12/24.
Input current: 3/7mA.
Output type: transistor drain type.
Output points: 32 points.
Common public end points: 32.
PLC is introduced by the relay control technology after the development of micro processing technology,
Can be easily and reliably used for switching control A1SC01B.
As the analog quantity can be converted into digital quantity, the number of digital quantity is just a number of switching value,
Therefore, after the conversion of analog, PLC can also be reliable for processing control A1SC01B
Because the continuous production process often has the analog quantity, the analog quantity control is sometimes called process control A1SC01B.
Analog quantity is not electricity, and PLC can only handle digital quantity, quantity of electricity.
All to realize the conversion between them to have the sensor, the analog quantity into a number of power.
If this power is not standard, but also through the transmitter,
The non-standard power into a standard electrical signal, such as 1-5V, 4-20mA, 0-10V, etc..
At the same time, there is also an analog input unit (A/D),
Transform these standard electrical signals into digital signals,
The analog output unit (D/A), in order to transform the digital quantity after PLC processing into analog quantity -- standard electric signal A1SC01B.
So the standard telecommunication number, the conversion between the number of operations to use a variety of computing.
This requires the resolution of the analog unit and the standard electrical signal. Using A6SIM-X64Y64 simulation I/O module in the system before the connection can be carried out to control the process oof debugging A1SC01B.
The simulation unit consists of 16 blocks of 4 switches and 4 LED LEDs. A1SG60 is an empty cover that is used to plug in the unused I/O slot on the main board or on the extended board.
A1SG60 is a reserved dummy module I/O poinnt to PLC extended I/O system A1SC01B.
With the switch on the module can be set to retain the I/O point,
Can set 16 points, 32 points, 48 points and 64 points.
...More relevant models >>>>