LK Automation Limited LK Automation Limited
Brand Sort: MITSUBISHI
Home >> Price
MITSUBISHI FR-HAL-H55K Price
MITSUBISHI FR-HAL-H55K
Type: 18 point terminal.
Input / output mode: analog voltage and current output.
Number of channels: 4 channels.
No need to extend or change the network wiring to increase the number of analog points.
The conversion speed of the analog input module can be selected from 100 mu s/ channel, 400 mu s/ channel and 1ms/ channel. (switching speed switching function)
The conversion speed of the analog output module is 100 mu s/ channel FR-HAL-H55K
Can be connected to the analog input / output module (NZ2GF2BN-60AD4, NZ2GF2BN-60DA4) after the use of.
IE CC-Link field network remote equipment station. According to the equipment, more easily distributed input and output devices.
Can be connected to the expansion module, more convenient to expand the input and output points.
Support synchronous communication (using with simple motion control module).
According to the simple motion control module of the network (Master) control cycle of the implementation of the control cycle and its synchronization,
Implementation of multiple simultaneous action from the station. Servo motor series: low inertia, small capacity.
Rated output: 1.5kw.
Rated speed: 2000r/min.
Electromagnetic brake: there.
Oil seal: have.
Corresponding servo amplifier: MR-JE-10B/MR-JE-10A.
Support position control, speed control, torque control, push and press control.
Position control can use linear, arc interpolation controller, fixed size feed control, target position change and other rich functions.
The position control and torque control are realized by switching control mode.
The gain adjustment of servo can be simply performed by the advanced one key tuning function.
At the same time, it is also able to suppress the low frequency vibration of the manipulator by the advanced vibration suppression control II,
Shorten the time to complete the positioning, so as to achieve the production of the rhythm of the shortening. Support for 5.7 inch.
Applicable models: GT16, GT15. No introductionMotor series: low inertia, small capacity.
Using a serial absolute / incremental encoder.
Rated output power: 0.4kw.
Rated speed: 3000rpm.
With the brake with brake.
Without GB.
Shaft end: straight shaft.
A servo motor is an engine that controls the operation of the mechanical components in the servo system.
Servo motor can make the control speed, position accuracy is very accurate, can be converted to torque and speed voltage signals to drive the control object.
Servo motor rotor speed is controlled by the input signal, and can quickly response,
In the automatic control system, used as actuators, and electromechanical time constant, high linearity, initiating voltage characteristics,
The signal can be converted into a motor shaft on the angular displacement or angular velocity output.
Divided into DC and AC servo motor two major categories, the main features are,
When the signal voltage is zero, there is no rotation,
The speed increases with the increase of the torque and the speed decreases.
FR-HAL-H55K Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=FR-HAL-H55K&select=5


...more relevant model market price >>>>
Related products
MITSUBISHI
AC reactor
FR-HAL-H185K
MITSUBISHI AC reactor FR-HAL-H185K
Power: 185kw. Purpose: to suppress the p
MITSUBISHI
Common DC bus converter
FR-CV-H55K
MITSUBISHI Common DC bus converter FR-CV-H55K
Power: 55kw. Voltage: 400V. There are 10
MITSUBISHI
AC reactor
FR-HAL-H15K
MITSUBISHI AC reactor FR-HAL-H15K
Power: 15kw. Purpose: to suppress the po
MITSUBISHI
DC reactor
FR-HEL-H55K
MITSUBISHI DC reactor FR-HEL-H55K
Power: 55kw. Purpose: to suppress the po